15BYHJ pm stepper motor/ 2 phase permanent magent stepper motor for
|No. of Phase|
|15BYHJ102.5||18/102.5||2||5||0. 5||10||2.3||1/102.5||1200||1000||350(At 200pps)|
1. 15mm series of PM stepper motors use permanent magnet rotors and
are commanded by electrical pulses.
2. The motors are constructed with the housing at the diameter of
3. The step angle was initially to be 18° and the motor itself
rotated by having the holding torque as much as 40g.cm maximally.
4. Motor has been assembled with a planetary gearbox made from POM
while the gear ratio is determined at 1:50.
5. Due to the space constraint inside the motor, a PCB (printed
circuit board for short) is put outside and welded with the out
6. Around the PCB, a black cover made from PBT is especially used
to prevent any dusts to ensure the PM stepper motor can operate
properly in a good working condition for a longer term.
Typical applications of our PM stepping motors are in Fax machine,
scanner, copy machine, IP camera as well as healthcare products.